background image

 

 
 

 

11 / 26 

 
 

3.2  Safety Equipment 

 

CAUTION: 

All the safety regulations listed in EN81 must still be observed after modifying the new door 
machine. 
 
 
 

In the case of a telescopic lift door, it should be noted that the door panel has a door interlock. 
Extract from EN81-1: 
Ch. 8.10 Lift-compartment sliding doors with several mechanically linked door panels 
8.10.1 In the case of lift-compartment sliding doors with several directly mechanically interlinked door pan-
els, it is permissible, 

a)

  to attach the installation as per 8.9.2 

1.  either only on one door panel (the fastest one in the case of telescopic doors) 
2.  or on the door drive, as long as there is a form-fitting link between the drive element and the door 

panels,, 

and 

b)  in the event of locking only one door panel and in accordance with the conditions as per 11.2.1 c, if 

this one interlock prevents the opening of the other door panels due to their intermeshing with each 
other in the closed position. 

 
When attaching and commissioning the TSG in/on a lift cabin, it must be ensured that the maximum per-
mitted total weight of the lift cabin is not exceeded under maximum rated load. 
 
In the event of an emergency stop or shut-down of the lift, it must be ensured that the TSG door-control 
unit does not cause any unintentional, dangerous or uncontrolled door movements. 
 
 

CAUTION: 

The simulated limit switch for “Door open”, “Door closed” and “Door blocked” on the control-
ler for the door and locking bar drive must not be used as safety equipment with any safety 
relevance. 
 
 

 

3.3  Car door lock 

 
WARNING: 

The Schindler QKS6/9 car door lock 

is not

 compatible with the Langer & Laumann  

modernization packages and 

is not

 supported! 

 

 

Содержание QKS6



























Отзывы: