7
INSTALLATION
DANGER:
THIS APPLIANCE MUST BE GROUNDED AT THE
TERMINAL PROVIDED. FAILURE TO GROUND THE
APPLIANCE COULD RESULT IN ELECTROCUTION AND
DEATH.
WARNING:
INSTALLATION OF THE UNIT MUST BE DONE BY
PERSONNEL QUALIFIED TO WORK WITH ELECTRICITY.
IMPROPER INSTALLATION CAN CAUSE INJURY TO
PERSONNEL AND/OR DAMAGE TO EQUIPMENT. UNIT
MUST BE INSTALLED IN ACCORDANCE WITH ALL
APPLICABLE CODES.
NOTICE:
The data plate is located on the left side of the unit in the
lower front corner. The voltage, wattage, serial number,
wire size, and clearance specifications are on the data
plate. This information should be carefully read and
understood before proceeding with the installation
NOTICE:
The installation of any components such as a vent hood,
grease extractors, fire extinguisher systems, must conform
to their applicable National, State and locally recognized
installation standards.
4.1 Assembly
The unit back is not attached to the machine. It is package loose behind the cheese-
melter.
The screws used to attached the back to the cheese-melter are screwed into the rear
edge of the machine.
