L&W Compressors LW 300 EC III Скачать руководство пользователя страница 48

Страница: 48 / 228

Page A - 46

LW 300 EC III / LW 450 EC III
Version: 24.04.18-001 E

M A I N T E N A N C E A N D S E R V I C E

Oil change

Oil change as follows:

• Run compressor warm for approx. 2 min.

• Switch off compressor unit, vent system and make sure it cannot be restarted.

• Place a suitable oil drain tray under the drain hose.

• Open oil drain valve and drain oil completely.

• Dismount oil filter cartridge with a filter tool (Part number: 009728).

•

Fill the new oil filter cartridge with 400 ml synthetic compressor oil and mount the oil filter
cartridge on the oil distribution block.

• Close oil drain valve.

• Loosen oil fill port with an appropriate adjustable wrench (AF 0-40 mm) and unscrew manually.

• Fill oil by using a funnel.

• Check oil level. The oil level should be between the middle and upper end of the oil sight glass.

• Screw oil fill port manually in and tighten with the adjustable wrench.

The oil change is now completed.

Maintenance intervals

• First oil and oil filter change after 25 operating hours (total hours).

• All further changes after each 1,000 operating hours.

Oil and oil capacity

Approx. 2,700 ml synthetic compressor oil is necessary for one oil change. Only use synthetic com-
pressor oil which is recommended as suitable from L&W.

Note

We recommend oil change at least once a year - depending on total operating hours.

Содержание LW 300 EC III





































































































































































































































Результаты поиска

Содержание LW 300 EC III

Отзывы:

L&W Compressors LW 300 EC III, Руководство по эксплуатации, Страница: 48 / 228

Результаты поиска

Содержание LW 300 EC III

Отзывы: