L&W Compressors LW 300 EC III Скачать руководство пользователя страница 17

Страница: 17 / 228

Page A - 15

LW 300 EC III / LW 450 EC III
Version: 24.04.18-001 E

S A F E T Y P R E C A U T I O N S

Maintenance instructions

• Hoses have to be checked by the operator (pressure and visual inspection) at reasonable inter-

vals, even if no safety-related defects have been detected.

• Immediately repair any damage. Escaping compressed air can cause injury.

• Depressurise system and pressure lines before beginning repair work.

• Pressurised air lines must be laid and mounted by qualified personnel. Connections must not be

mixed up. Fittings, length and quality of the piping must correspond to requirements.

• Adjustment, maintenance and inspection activities and keep appointments, including informati-

on on replacement parts / equipment, prescribed in the operating instructions have to be respec-
ted.

• If the machine / equipment is completely off during maintenance and repair work, it must be

protected against unexpected restart. Turn off main control device and remove the key and/or
display a warning sign on the main switch.

• The machine and especially the connections and fittings should be cleaned from oil, fuel and

maintenance products at the beginning of the maintenance / repair. Do not use aggressive
cleaning agents. Use fibre-free cleaning cloths.

• Switch off compressor and clean with a slightly damp cloth. Remove dirt from cooling pipes by

using a brush.

• After cleaning, examine all pipes for leaks, loose connections, chafing and damage. Immediately

eliminate any faults.

• Always retighten any screw connections loosened for maintenance or repair work.

• If it is necessary to remove safety devices for maintenance and repair work, these must be re-

placed and checked immediately after completion of the maintenance or repair work.

• The electrical equipment of the compressor must be regularly checked. Defects, such as loose

screw connections or burnt wires, must be immediately rectified by electrically skilled personnel.

• Only personnel with particular knowledge and experience with pneumatics may carry out work

on pneumatic equipment.

• Only personnel with particular knowledge and experience in gas equipment may carry out work

on gas equipment.

Содержание LW 300 EC III





































































































































































































































Результаты поиска

Содержание LW 300 EC III

Отзывы:

L&W Compressors LW 300 EC III, Руководство по эксплуатации, Страница: 17 / 228

Результаты поиска

Содержание LW 300 EC III

Отзывы: