L&R Quantrex Q90, Руководство владельца/оператора

Страница: 11 / 28

11
2. Included with your recessed cleaner is a stainless steel
mounting rim. Use it as a template and trace the
required cut out on your countertop with a crayon or
china marker.
3. Drill a ½ inch hole anywhere within the section to be
cutout.
4. Using a sabre saw, carefully cut the tank shape out of
the countertop.
5. Clean away saw dust. Position the mounting rim over the
cut out and check fit. Adjust hole if required.
6. Remove rim. Carefully apply a bead of clear silicone (GE
732 or equivalent) ½ inch wide, ⅛ inch high around the
cut out.
7. Position mounting rim over cut out.
8. Carefully apply a bead of silicone ⅜ inch wide, ⅛ inch
high around the inside edge of the mounting rim.
9. Set the tank into the rim. Allow the silicone to squeeze
out. Wipe the excess silicone.
10. Allow the tank to set for at least eight hours without
being disturbed.
11. After the silicone has cured, carefully scrape any
excess silicone, being careful not to scratch the rim or
countertop.
Recessed rim option
Recessed rim installation is similar. For specific details
check instructions supplied with that option.
Connecting the Drain
Protruding through the bottom of the tank assembly on a
recessed machine is a drain valve and associated fittings
and a 36” length of tygon tubing.
Every recessed installation is unique because of different
counter sizes, access to waste lines, etc., and should be
done by a plumber or technician in accordance with local
plumbing codes.
Mounting rim
Bead of silicone
about 1/2"
(not to scale)