Landoll BRILLION TURFMAKER II SL Скачать руководство пользователя страница 64

Страница: 64 / 100

3-6

9K998

OPERATION

Attaching/Detaching Pull Type

Seeder

Attaching the Seeder for Field Operations:

Seeder parked lowered

1. Attach Seeder to the Tractor.
2. Raise the Seeder fully to extend the Hydraulic Lift

Cylinders and rotate the Transport Locks in the
engaged position over the Cylinder Rod. Secure with
the Clevis Pins and Hairpin Cotters.

See Figure 3-5.

3. Raise and rotate Drawbar Jack to stored position

before setting the machine in motion.

4. Transport the Seeder to the area to be seeded.
5. Disengage each Transport Lock so that the

Transport Lock rests on the Wheel Arm. Insert the
Clevis Pin in front of the Transport Lock.

See

Figure 3-7.

Seeder parked raised

1. Attach Seeder to the Tractor.
2. Raise and rotate Drawbar Jack to stored position

before setting the machine in motion.

3. If not already done, raise Seeder fully to extend the

Hydraulic Lift Cylinders and rotate the Transport
Locks in the engaged position over the Cylinder Rod.
Secure with the Clevis Pins and Hairpin Cotters.

See

Figure 3-5.

4. Transport the Seeder to the area to be seeded.
5. Disengage each Transport Lock so that the

Transport Lock rests on the Wheel Arm. Insert the
Clevis Pin in front of the Transport Lock.

See

Figure 3-7.

Detaching the Seeder:

Parking Seeder lowered

1. Raise the Seeder fully to extend the Hydraulic Lift

Cylinders and rotate the Transport Locks to the
stored position. Secure with the Clevis Pins and
Hairpin Cotters.

See Figure 3-7.

2. Lower Seeder, relieve pressure from Hydraulic

Hoses.

3. Rotate and Lower Drawbar Jack.
4. Disconnect the Tractor from Seeder.

Parking Seeder raised

1. Raise the Seeder fully to extend the Hydraulic Lift

Cylinders and rotate the Transport Locks to the
engaged position. Secure with the Clevis Pins and
Hairpin Cotters.

See Figure 3-5.

2. Relieve pressure from Hydraulic Hoses.

3. Rotate and lower Drawbar Jack.
4. Disconnect the Tractor from Seeder.

Figure 3-7: Transport Lock Disengaged

:KHHO

$UP

7UDQVSRUW

/RFN

&OHYLV3LQ

+DLU3LQ

&RWWHU

)UDPH

GLVHQJDJHG

&\OLQGHU

Содержание BRILLION TURFMAKER II SL





































































































Результаты поиска

Содержание BRILLION TURFMAKER II SL

Отзывы:

Похожие инструкции для BRILLION TURFMAKER II SL

Бренды по названию

Популярные бренды

Landoll BRILLION TURFMAKER II SL, Руководство оператора

Результаты поиска

Содержание BRILLION TURFMAKER II SL

Отзывы:

Похожие инструкции для BRILLION TURFMAKER II SL

Бренды по названию

Популярные бренды