manualshive.com logo in svg

Landoll Brillion SSB, Руководство оператора

Landoll Brillion SSB - качественный и надежный продукт для земледелия. Вы можете загрузить бесплатное операторское руководство на нашем сайте, чтобы получить подробную информацию о его использовании. Узнайте все нужные инструкции и рекомендации в manualshive.com.

Поделиться
Скачать
background image

2-1

Chapter 2

Assembly

CAUTION

WARNING

NOTE

Refer to the repair parts manual 1P481 for identification 
of parts and for the approximate relationship of the parts 
in assembly. Your exact Seeder Model may vary slightly 
from the illustration.

To ensure alignment of assemblies, 

leave the nuts 

l

oose until completion 

of final assembly. Use lock 

washers or flat washers as specified. Spread all cotter 
pins.

After completion of final assembly, tighten all nuts
evenly 

to prevent misalignment, distortion or binding. 

Tighten all screws and nuts to the recommended 
torques.

IMPORTANT

• If pre-assembled parts or fasteners are temporarily 

removed, remember where they go. It is best to keep 
parts separated.

• Check that all working parts move freely, bolts are 

tight and cotter pins spread.

• Refer to the Torque Table for proper torque valves. 

Note the different torque requirements for bolts with 
lock nuts. 

See Page 4-1

.

“Left” and “Right” refer to directions seen as if standing 
behind the machine and facing in the direction of forward 
travel.

IMPORTANT

All harnesses must be firmly attached to machine 
frame members, so they don’t sag or become torn 
loose by field debris. Use the tie wraps provided.
Check to be sure the harnesses at center of machine is 
slack enough so as not to be stretched or interfered 
with while rotating frame from transport to field 
working position and vice versa.

Do Not Work On Or Under This Machine Unless 
Securely Blocked And Supported By A Hoist Or 
Tractor Or By Other Sufficient Means!

Do not attempt to lift heavy parts manually. Use a 
hoist or a fork lift to move these parts into 
position.

Содержание Brillion SSB







































































































Отзывы:

Нет отзывов

Похожие инструкции для Brillion SSB

Бренды по названию

Популярные бренды

Загрузить еще бренды