Landoll Brillion LSP5, Руководство оператора

Страница: 15 / 34

7K458-0221 2-5
TABLE OF CONTENTS
Acre Meter Kit 6K036 Installation
The Acre Meter Kit consists of four main parts; Acre Meter
Assembly, Pick-up Switch Bracket, Pick-up Switch, and
Magnet Wheel.
1. Drill 13/32" holes into seedbox at location shown.
See
Figure 2-7.
2. Next, use 3/8-16 NC x 1" capscrews, lock washers,
and nuts to attach the bracket which holds the Acre
Meter, as shown, onto the left front of the seedbox.
3. Mount the Acre Meter onto this bracket with #10-24 x
1" machine screws, lock washers and nuts.
4. Run the wire from the bottom of the meter down the
side of the seedbox and along its left side. Use
mounting bases to hold the wire in place. Run it
across the plate which attaches the seedbox to end
plate. Here, it will plug into the mating cable from the
pick-up.
WARNING
Figure 2-7: Acre Meter Installation (1 of 2)
Do not pressure clean with air or water.
Machine Screw,
#10-24 X 1"
Nut, 3/8"
Acre Meter
Assembly
Drill 13/32"
Holes
Lock Washer, 3/8"
FRONT
#10
Lock Washer
Nut, #10-24
Pick-up Box
Cable
Acre Meter
Cable
Mounting
Base
Capscrew,
3/8-16 X 1"