Landoll Brillion BH1020, Руководство оператора

Страница: 13 / 32

ASSEMBLY
2-3
Bridge Hitch Installation
PFT Series
Bring the rear of the Bridge Hitch into position between the frame hitch plates at the center of the frame. Place two
1-1/4 Washers on each side between the Bridge Hitch and the Hitch Plates. Line up the holes and insert 1-1/4-7 x
10-1/2 Bolt, secure with Locknut.
The locknut should be tightened so that the frame is free to pivot on the Bridge Hitch.
See Figure 2-2.
Figure 2-2: PFT Series Installation
PT Series
Bring the rear of the Bridge Hitch into position between the frame hitch plates at the center of the frame. Place one
1-1/4 x 1-7/8 Machinery Bushing on each side between the Bridge Hitch and the Hitch Plates. Line up the holes and
insert 1-1/4 x 10 Pin, insert two 1/4 x 2 Cotter Pins and spread them.
See Figure 2-3
Figure 2-3: PT Series Installation
Locknut
Bolt,1-1/4-7 x 10-1/2
Washer,1-1/4
Hitch Plate
Bridge Hitch
Frame
Cotter Pin,
1/4 x 2
Pin,1-1/4 x 10
Mach Bushing,
1-1/4 x 1-7/8 x 14ga
Hitch Plate
Bridge Hitch
Frame