Landoll 900C Series, Руководство оператора

Страница: 34 / 80

3-22 F-473-0212 Edition
OPERATING INSTRUCTIONS
Figure 3-12: Bulkhead (Option)
Bulkhead (Option)
1. Optional bulkheads may come with or without chain
racks. To remove a bulkhead, disconnect the
electrical harness (if work lights are present), remove
retaining pins holding the bulkhead into the pockets
on the semitrailer front and bolts and nuts attaching
the bulkhead extensions and supports to the deck,
and lift the bulkhead off
(See Figure 3-12.)

DANGER
Remote Control (Option)
1. A wireless six function radio remote control is
available
(See Figure 3-13.)
2. The wireless radio remote has six momentary push
button switches that operate the functions as labeled
on the hand held remote.
3. Specifications:
RF: 902-928 MHz FHSS 10mW
Temperature: Receiver: -40
o
to +85
o
C
Transmitter: -20
o
to +60
o
C
Output Rating: 5 Amps each (sourcing)
20 Amp system maximum
Encapsulated electronics inside receiver.
Transmitter IP-66
Power: 3.7V LiPo battery
Battery Life: 30 - 40 hours continuous
bulkhead
CHAIN RACK
BULKHEAD
BULKHEAD
EXTENSION
1/4 X 2 COTTER PIN
HITCH LEVELING
LINK PIN
To avoid serious injury, all removable
attachments must be firmly attached with
fasteners provided at all times.