Landoll 876 Series, Руководство оператора

Страница: 37 / 58

3-9 PULL HITCH INSTALLATION
IMPORTANT
SEE FIGURE 3-10 FOR PART NAMES.
3-9.1 Install pull hitch assembly to frame us-
ing hitch pins, flat washers, and 1/4 x 2-1/2
cotter pins.
3-9.2 Install hitch ring assembly to pull hitch
assembly using 1-8 x 8 or 1-8 x 8-1/2 hex
head cap screw, flat washer, hitch bushing,
and hex lock nut.
3-9.3 Install radius rod assembly to mast us-
ing extended cylinder pin and 1/4 x 2 cotter
pins.
IMPORTANT
THE RADIUS ROD AFFECTS TWO ADJUST-
MENTS:
IT LOCATES THE PULL HITCH CLEVIS AT
THE PROPER HEIGHT FOR THE TRACTOR
DRAW BAR.
IT LEVELS THE MACHINE. LENGTHENING
AND SHORTENING CAN BE ACCOMPLISHED
BY USING THE RADIUS ROD HANDLE.
3-9.4 Install hose bracket to pull hitch assem-
bly using split lock washer and hex nut.
3-9.5 Install jack to pull hitch assembly using
hitch pin with chain included.
3-19