Landoll 345B, Руководство оператора

Страница: 25 / 66

3-15 DOCK LEVELER CONTROL
3-15.1 To activate the dock level hydraulic cir-
cuit, pull out on the push-pull selector valve
located on the left driver’s side of trailer bed
near the front.
3-15.2 The DOCK LEVELER CONTROLS are
located under the deck, on the driver’s side,
between the axles (See Figure 3-6) . The
front-most control adjusts the cylinder on the
driver’s or street side of the trailer. The rear-
most control adjusts the cylinder on the
curb-side of the trailer. Both controls have
three position.
IN When the control for either cylinder
is pushed in, toward the center of the
trailer, the corresponding side of
trailer is lowered.
CENTER This position is neutral for either con-
trol. When either control is in this po-
sition, there is no effect on either cyl-
inder.
OUT When the control for either cylinder
is pulled out, away from the center of
the trailer, the corresponding side of
trailer is raised.
3-15.3 After completion of dock level use re-
turn the push-pull selector valve to full in po-
sition.
3-13
Figure 3-6 Dock Leveler Controls