8
Symbols
Danger symbol: This symbol indicates possible dan-
gers. Read the associated safety notices carefully and
follow them.
Supplementary information
Read the assembly and operating instructions before
use!
Caution: hot surfaces!
Direct current
Signal Words
Signal words indicate hazards if the associated notices are not fol-
lowed.
DANGER –
high risk, results in serious injury or death
WARNING –
medium risk, may result in serious injury or death
CAUTION –
low risk, may result in minor or moderate injury
NOTICE –
may result in risk of damage to material
Further Explanations
Key numbers
are shown as follows: (
1
)
Picture references
are shown as follows: (Picture
A
)
Dear Customer,
Thank you for choosing the Designer Fire from LANDMANN. Please follow these
assembly and operating instructions step by step to get the LANDMANN fire you have
just purchased ready for use. In addition, we provide you with important notices about
how to use and handle the device safely and how to look after it.
If you have any questions about your Designer Fire or require further support, our
Service team will be happy to help. You will find the relevant contact details on the
back of these assembly and operating instructions.
Your laNDMaNN team hopes you enjoy using it.
CONTENTS
Technical Data 9
Items Supplied 9
Device Overview 9
Intended Use 9
Safety Notices 10
Requirements Placed on the Gas-Carrying Components 11
Assembling the Device 11
Connecting the Gas Cylinder 12
Leak Test 12
Inserting the Battery of the Electric Ignition 13
Use 13
Storage 13
Cleaning and Maintenance 13
Troubleshooting 14
Disposal 14
EC Declaration of Conformity 14
READ THESE ASSEMBLY AND OPERATING
INSTRUCTIONS BEFORE YOU START USING THE
DEVICE!
A failure to follow the listed safety notices, precautionary meas-
ures and steps may lead to serious or even fatal injuries or to
material damage caused by a fire or explosion.
Keep these assembly and operating instructions for future
reference and other users.
They form an integral part the
device. The manufacturer and importer do not accept any liability
if the information in these assembly and operating instructions is
not complied with.
WARNING:
■
The injector is not removable.
■
Change the gas cylinder in an empty ventilated area, away
from ignition source (candle, cigarettes, other flame producing
appliances).
■
Do not obstruct the ventilation holes of the cylinder housing.
■
Keep the instructions for future reference.
■
Check that the regulator seal is correctly fitted an able to fulfil
its function.
■
The tubing or the flexible hose must be changed within the
prescribed intervals.
EN
P1201CA_Inlay_LM_M_A4_CE_V1_0522.indb 8
P1201CA_Inlay_LM_M_A4_CE_V1_0522.indb 8
31.05.2022 12:13:59
31.05.2022 12:13:59