Landmann 470220, Руководство по сборке и эксплуатации, Страница: 18 / 32

PAGE 18
Pellet Kettle
Controller Instructions
CONTROLLER FUNCTIONS
Meat Probe 1 & 2
Auger
Temperature adjust
Igniter
Power
Smoke/Cook
Fan
Set
NOTE:
• The maximum temperature that the pellet grill can achieve is influenced by the ambient temperature. In colder weather,
the grill may not be able to achieve the highest set temperature and it will continually feed pellets into the fire pot at-
tempting to reach the set temperature.
• There might be some discrepancy between the digital temperature displayed and the actual temperature inside the grill.
Some varience is normall due to temperature gauge locations and calibration differences.
• When changing the operating temperature, allow up to 15 minutes for the temperature to stabilize.
If lowering the temperature, it is best to leave the open lid for a few minutes to help decrease the temperature quicker.
Press to set temperature or
change smoke mode
Pellet auger is on Pellet igniter is on
Turn grill on or off
Change control from
Smoke mode to Cook
mode
Blower fan is on
The plug-in connection port on
the front of the Digital Control
Center is for a Meat Probe. When
the meat probe is connected, the
temperature is displayed on the
LED Screen. When not in use,
disconnect the meat probe from
the connection port.
Change temperature up or down
(Cook mode)
Or, select smoke mode P0 to P3
(Smoke mode)