
25
LANDMANN
Trouble shooting
If there is a fault despite due care, this chapter may help you to resolve the malfunction.
Malfunction
Cause
Remedy
There is a smell of gas
Leak in the gas system
1. Close the cylinder valve immediately
(turn operating lever (G2) to a 3
o'clock position).
2. Prevent any flame or spark formation
(do not switch on any electrical
appliances)
3. Tighten all connections of the gas
system.
4. Inspect
all
gas-supplying
components for signs of external
damage; replace any defective parts
with original spare parts
5. Use a leak detection agent to check
the gas system for leaks.
Burner does not light
Gas cylinder empty
Replace gas cylinder
Cylinder valve is closed
Turn the operating lever (G2) to a 6
o'clock position
Ignition battery is flat
If when the flame regulator knob is
depressed there is no clicking noise to be
heard, it is possible that the battery needs
to be changed (see chapter "Assembly").
Ignition cable without contact
Conduct a visual inspection, connect the
ignition cable if necessary
The gas outlet nozzle is not inserted
in the burner
Visual inspection, if necessary adjust the
burner
Ignition pin next to the burner is
bent
Visual inspection; correct if necessary
Gas outlet nozzle is blocked
Clean the gas outlet nozzle with a pin
Other gas system is blocked
The gas system should be cleaned by a
gas specialist
Temperature on grill too low
Pre-heating time is too short
Close the lid and set the flame regulator
to Max
Gas outlets on the burner are
blocked
Remove blockage from burner