Landmann 11760, Сборка и руководство по эксплуатации

Страница: 7 / 13

11760 39
Assembly
Here are a few tips to help you assemble your fire pit
quickly and successfully:
• Check that no parts are missing by carefully plac-
ing all of the individual parts in some free space
(subject to minor technical changes).
• If, despite careful factory checks, a component
should be missing, please contact our customer
service department (see last page). We will imme-
diately attend to your request.
• To assemble the barbecue you only need a
medium-size screwdriver as well as an 8 mm open
ended spanner.
• Only use tools that are intact and suitable for the
job at hand. Worn or unsuitable tools will not
allow you to tighten the bolts sufficiently, but
will damage them to the extent that they can no
longer be turned.
• Always fit all connecting elements (screws, nuts,
bolts, etc.) as shown in the illustrations. If you
misplace a connecting element, replace it with
an appropriate part. Only by doing this can you
ensure that the construction is strong and safe.
• Be sure to follow the instructions in the specified
order!
• Tighten all the screw joints hand tight so that you
can align the fire pit correctly. After assembling all
the parts, tighten all the joints.
• Even if you are not experienced at DIY, assembly
does not generally take longer than one hour.
•
The illustrations showing the assembly steps are
at the end of this manual.
Operation
Caution:
Please note the maximum permitted capacity of
the fire pit with wood, charcoal and briquettes
(see 'Technical specifications'). If the fire pit is
overfilled it can result in damage.igen.
Only use approved barbecue lighters (such as Land-
mann solid firelighters); never use petrol, spirits or
other substances that are subject to deflagration
when ignited.
Check to ensure that ....
– there are not, and will not be, any flammable
materials or substances near the fire pit. The
minimum distance to flammable materials or
substances is 5 m and the minimum distance
to flame-resistant materials or substances, e.g.
house walls, is at least 2 m.
– the fire pit is protected from the wind.
– the fire pit is positioned firmly on a sufficiently
large surface area. It must not be moved dur-
ing operation.
– the fire pit is fully assembled and has no appar-
ent faults.
Using the fire pit as a fire basket
Caution:
Open fire is not permitted in some areas. Observe
local regulations.
1. Remove the cooking grill (1) and the fire bowl (2).
2. Lay wood in the bottom inlay (7) to form a pyra-
mid.
3. Ignite the wood with an approved firelighter for
barbecues. Observe the safety instructions for the
firelighter..
Using the fire pit as a fire basket