Operator Manual S755 (G2) / S755 XL (G2)
October 2017
Landis International - 22
5.
If tensions or conditions are bad, adjust tension or replace V-belt.
6.
After making adjustments, remove all wrenches and other tools before operating
the Finisher.
•
DO NOT OVER TIGHTEN V-BELT, AS TO DO SO WILL CAUSE RAPID BELT WEAR AND PREMATURE BEARING
FAILURE.
•
AFTER MAKING ADJUSTMENTS, REMOVE ALL WRENCHES AND OTHER TOOLS BEFORE OPERATING THE
FINISHER.
3 MONTHS MAINTENANCE
•
BEFORE REMOVING DUST BAG, DISCONNECT ELECTRICAL POWER SUPPLY.
DUST BAG
Once 3 months, you should remove the dust bag for a thorough
cleaning.
The dust bag is removed by:
1.
Before removing dust bag, disconnect electrical power supply.
2.
Remove temporarily the back filters.
3.
Unscrew and remove the metal collet hose on top of the dust
drawer.
4.
Remove the velcro strap (888443LG) from the blower entry.
5.
You can use a vacuum cleaner to clean both inside and outside
of the dust bag.
6.
2 solutions for cleaning the bag:
-
Dry cleaning
or
-
Cold water and drying flat
Содержание S755 (G2)
Страница 1: ...S755 G2 S755 XL G2 FINISHER Operator Manual Manufactured by ...
Страница 27: ...Operator Manual S755 G2 S755 XL G2 October 2017 Landis International 27 LANDIS S755 G2 S755 XL G2 SOLE TRIMMER ...
Страница 28: ...Operator Manual S755 G2 S755 XL G2 October 2017 Landis International 28 LANDIS S755 G2 S755 XL G2 HEEL TRIMMER ...