Decommissioning and disposal
27/30
D000011142 en k – E65C CU-B1, B2, B4 – User Manual
© Gyr
7
Decommissioning and disposal
Electronic waste treatment
This product must not be disposed of in regular waste. Use a professional
electronic waste treatment process.
The components used to manufacture the device can, in the main, be
broken down into constituent parts and sent to an appropriate recycling or
disposal facility. When the product is removed from use, the whole product
must be sent to a professional electronic waste treatment process. The
waste treatment and disposal plants must be approved by local regulatory
authorities.
The end processing of the product and recycling of its components must
always be carried out in accordance with the rules and regulations of the
country where the end processing and recycling are done.
On request, Gyr will provide more information about the
environmental impact of the product.
Disposal and environmental protection regulations
The following are general guidelines and should NOT take priority over
local disposal and environmental policies which should be adhered to
without compromise.
Components
Disposal
Printed circuit boards
Delivered to recycling plants
Metal components
Sorted and delivered to metal recycling plants
Plastic components
Sorted and delivered to re-granulation if at all
possible
