10/30
Safety
© Gyr
D000011142 en k – E65C CU-B1, B2, B4 – User Manual
2 Safety
2.1 Safety
information
The following symbols are used to draw your attention to the relevant
danger level, i.e. the severity and probability of any danger, in the individual
sections of this document.
Danger
Identifies an extraordinarily great and immediate danger that could lead to
serious physical injury or death.
Warning
Indicates a potentially hazardous situation that may result in minor physical
injury or material damage. Always consult the User Manual when this
symbol is used on the equipment to find out the nature of the potential
hazards and any actions that must be taken to avoid them.
Note
Indicates general details and other useful information to help you with your
work.
In addition to the danger level, safety information also describes the type
and source of the danger, its possible consequences and measures for
avoiding the danger.
Failure to use the equipment as described in this manual may result in
circumventing the protection afforded by the design of the equipment.
2.2 Responsibilities
The owner of the meters – usually the utility company – is responsible for
assuring that all persons engaged in working with meters, such as service
personnel:
Have read and understood the relevant sections of the user manual.
Are appropriately qualified for the work to be performed.
Strictly observe the safety regulations (laid down in section 2.3) and
the operating instructions as specified in the individual sections.
In particular, the owner of the meters bears responsibility for the protection
of persons, prevention of material damage and the training of personnel.
For this purpose, Gyr provides training on a variety of products and
solutions. Please contact your local Gyr representative if interested.
