Landice L10, Руководство по обслуживанию

Страница: 54 / 66

54
Contact Heart Rate Diagnostics:
Contact Heart Rate Diagnostics
Step 1
Place your hands on both pulse grips and
keep them there for 5-10 seconds. The
heart rate icon should blink, and provide
BPM information. If it doesn’t appear,
you will need to remove the outer cover
of the Remote Console (see Remote
Console Instructions) and proceed to
Step 2.
Step 2
Using a voltmeter set to “Continuity”, locate the 3
rd
wire in on the Ribbon Cable (X pattern on wire) and
place one prong. Place your other voltmeter prong on the corresponding wire at other end of harness.
If continuity passes (voltmeter will beep), move to the next segment of the Ribbon Cable and repeat. If
the ribbon cable passes continuity, check for bent pins at the Upper Board.
If continuity fails along the ribbon cable, Replace the Remote Console (P/N 75020) and
Ribbon Cable (P/N 10033)