Landice L10, Руководство по обслуживанию

Страница: 52 / 66

52
LVS Installation Instructions:
BVE Remote Control Installation Instructions
Step 4
Using the BVE Mounting Bracket, measure and mark the holes for the mounting bracket in its place on
the back of the console as shown in Illustration A . Then using a drill and a ¼-20 Drill Bit, drill out the
mounting holes and mount the Remote Control Bracket in its place. From the inside of the console,
install the metal reinforcement bracket along with the (2) ¼-20 stop nuts securing the bracket in its place
as shown in Illustration B . Using your Phillips Head Screwdriver, mount the BVE Remote Control on the
end of the bracket and tighten it in place as shown in Illustration C .
LVS Wiring Connections Instructions
Step 4
Attach the power and remote control cabling as shown above. The remote control will fit in the RJ45
port. Finally, connect the coaxial and HDMI cables into their respective ports. Check all connections,
and plug the treadmill into a power source to verify the BVE system is functioning correctly.
¼” From Side of Console
½” From Top of
Louver
C
A
B
A
( BEFORE CABLES ATTACHED)
B
( AFTER CABLES ATTACHED)