DATA DISPLAY
6
Landi Renzo S.p.A.
DATA DISPLAY PAGE
To enter the data display page, select
DISPLAY
and press
=
.
On this page it is possible to display the following information (fig. 5):
MOT
: indicates the position in real time of the linear actuator with the stepper motor (value in steps).
DEF
: is the position acquired by default of the linear actuator with the stepper motor.
RPM
: speed of the engine in real time.
TPS
: indicates the position of the TPS expressed in volts.
[]]]
: TPS learning settings.
[]]]
: the first quadrant indicates the range of engine idling speed.
][]]
,
]][]
: the second and third indicate the position of the TPS during cruising speed.
]]][
: the fourth indicates when the TPS detects the position.
M ]]][]]] R
: indicates the type of signal detected by the lambda sensor.
When the cursor is in position
L []]]]]] R
it indicates that the mixture measured by the lambda sensor is
LEAN
.
When the cursor is in position
L ]]]]]][ R
the mixture measured by the lambda sensor is
RICH
.
Pressing the
/
button takes you back to the
MAIN MENU
page.
MAIN MENU
^ DISPLAY
SETTING
DIAGNOSIS
MOT 80 DEF 80
RPM 800
TPS 1.8 V ][]]
L ]]][]]] R
Main menu, fig. 4
Display menu, fig. 5
