Programmer tester Mod. V05
3
FEATURES
The Programmer Tester Mod. V05 is used to program and diagnose the LCS-A/1 V05 system.
It display parameters that characterize the operation of the entire system such as the lambda value (whether on
gas or petrol), the position of the linear actuator with the stepper motor and its default, the engine speed, and TPS
signal.
The Programmer Tester Mod. V05 is supplied directly by the cable linking it with the LCS-A/1 V05 central unit.
OFFERS
(fig.1)
The keypad offers different controls depending on the “page” the tester is on.
A) Alphanumerical display.
B) Button that shifts the cursor upwards, increases the value and passes on to the previous “page”.
C) Button that shifts the cursor downwards, decreases the value and passes on to the next “page”.
D) Button to quit the “page”.
E) Button that confirms the figure and goes into value modify mode.
F) Connector for connection with the interface cable.
The first page displayed on activating the tester is the
MAIN MENU
, (fig. 2).
Description of main elements, fig. 1
TESTER PARAMETERS AND VALUES THAT CAN BE SELECTED
Display menu (fig. 3)
Makes it possible to know the following values in real time:
• Value of default position of linear actuator with stepper motor.
• Engine speed.
• TPS value.
• Lambda sensor signal indicator.
MAIN MENU
^ DISPLAY
SETTING
DIAGNOSIS
Main menu, fig. 2
MOT 80 DEF 80
RPM 800
TPS 1.8 V ][]]
L ]]][]]] R
Display menu, fig. 3
PROGRAMMER - TESTER Mod. V05
