manualshive.com logo in svg
background image

8

Safety

WARNING: Protect machine 
from freezing.

AVERTISSEMENT: Protéger la 
machine contre le gel.

16.To keep machine in best 
operating conditions, it is 
important you protect machine 
from freezing. Failure to protect 
machine from freezing could 
cause malfunction of the machine 

and result in death, serious bodily injury, and/or 
property damage. Follow storage instructions 
specified in this manual.

17.  Inlet water must be clean fresh water and no hotter 

then 90°F.

DANGER: Risk of asphyxiation. 
Do not inhale fumes. Use this 
product only in a well ventilated 
area. Running this product 
indoors can result in death due 
to carbon monoxide, a 
poisonous gas you cannot see 
or smell. Never operate indoors 
even if windows and doors are 
open. Only use outdoor and far 
away from windows, doors, and 

openings or vents.

DANGER: Risque d'asphyxie. Ne pas inhaler les 
vapeurs. Utiliser ce produit uniquement dans un 
endroit bien ventilé. L'utilisation de ce produit à 
l'intérieur peut causer la mort par monoxyde de 
carbone, un gaz toxique incolore etinodore. Ne 
jamais utiliser à l'intérieur, même si les fenêtres et 
les portes sont ouvertes.

18. Manufacturer will not be liable for any changes 

made to our standard machines or any compo-
nents not purchased from us.

19. The best insurance against an accident is precau-

tion and knowledge of the machine.

WARNING: Be extremely careful 
when using a ladder, scaf-
folding or any other relatively 
unstable location. The cleaning 
area should have adequate 
slopes and drainage to reduce 
the possibility of a fall due to 
slippery surfaces.

AVERTISSEMENT: Faire preuve 
d'une extrême prudence au 

moment d'utiliser une échelle, des échafaudages 
ou toute autre surface relativement instable. La 
zone de nettoyage doit avoir une pente et un 
drainage adéquats pour réduire la possibilité d'une 
chute due à une surface glissante.

20. Do not allow acids, caustic or abrasive fluids to 

pass through the pump.

21. Never run pump dry or leave spray gun closed 

longer than 1-2 minutes.

22. Machines with shut-off spray gun should not be 

operated with the spray gun in the off position for 
extensive periods of time as this may cause 
damage to the pump.

23. Protect discharge hose from vehicle traffic and 

sharp objects. Inspect condition of high pressure 
hose before using or bodily injury may result.

24. Before disconnecting discharge hose from water 

outlet, turn burner off and open spray gun to allow 
water to cool below 100° before stopping the 
machine. Then open the spray gun to relieve 
pressure. Failure to properly cool down or maintain 
the heating coil may result in a steam explosion.

25. Do not overreach or stand on unstable support. 

Keep good footing and balance at all times.

26. Do not operate this machine when fatigued or 

under the influence of alcohol, prescription medica-
tions, or drugs.

WARNING: Do not spray 
machine or any people, animals 
or electrical parts.

AVERTISSEMENT: Ne pas 
vaporiser sur la machine ou les 
gens, les animaux ou les pièces 
électriques.

Follow the maintenance instruc-
tions specified in the manual. 

Suivre les instructions d'entretien 
spécifiées dans le manuel.

WARNING

PROCTECT FROM

FREEZING

DANGER

RISK OF 

ASPHYXIATION. 

USE THIS PRODUCT 

ONLY IN A WELL 

VENTILATED AREA.

WARNING

RISK OF INJURY

FROM FALLS WHEN

USING LADDER.

WARNING

DO NOT SPRAY 

MACHINE OR ANY 

PEOPLE, ANIMALS OR 

ELECTRICAL PARTS.

Landa SLT/SLX Kubota Diesel Operator’s Manual  9.807-540.0 - E

Содержание SLT Series



























Отзывы: