manualshive.com logo in svg
background image

7

Safety

Engines on mobile or portable equipment shall be 
refueled:

a. outdoors;
b. with the engine on the equipment stopped;
c. with no source of ignition within 10 feet of the 
dispensing point; and
d. with an allowance made for expansion of the 
fuel should the equipment be exposed to a higher 
ambient temperature.

In an overfilling situation, additional precautions are 
necessary to ensure that the situation is handled in a 
safe manner.

WARNING: Risk of injury. Disconnect battery 
ground terminal before servicing.

AVERTISSEMENT: Risque de blessures. 
Débrancher la borne de mise à la terre de la batterie 
avant de procéder à des opérations d'entretien.

8. When in use, do not place machine near 

flammable objects as the engine is hot.

9. Oil burning appliances shall be installed only in 

locations where combustible dusts and flammable 
gases or vapors are not present. Do not store or 
use gasoline near this machine.

10. Use Ultra Low Sulfur Diesel (ULSD) fuel standard 

ASTM D975 only.

11.

NEVER 

use crankcase or waste oil in your burner. 

Fuel unit malfunction could result from contamina-
tion.

WARNING: Risk of injury. Hot 
surfaces can cause burns. Use 
only designated gripping areas of 
spray gun and wand. Do not place 
hands or feet on non-insulated 
areas of the pressure washer.

AVERTISSEMENT: Risque de 
blessures. Les surfaces chaudes 
peuvent causer des brûlures. 
Utiliser uniquement les zones de 

prise désignées du pistolet pulvérisateur et de la 
lance. Ne pas placer les mains ou les pieds sur des 
endroits non isolés de la laveuse à pression.

12. Transport/Repair with fuel tank EMPTY or with fuel 

shut-off valve OFF.

CAUTION: Hot discharge fluid. Do 
not touch or direct discharge 
stream at persons or animals.

WARNING: This machine produces 
hot water and must have insulated 
components attached to protect 
the operator.

13. To reduce the risk of injury, close 

supervision is necessary when a 

machine is used near children. Do not allow 
children to operate the pressure washer. This 
machine must be attended during operation. 

WARNING: Grip cleaning wand 
securely with both hands before 
starting. Failure to do this could 
result in injury from a whipping 
wand.

AVERTISSEMENT: Agripper la 
lance de nettoyage avec les deux 
mains avant de commencer. Le 
non-respect de cette consigne 
pourrait mener à des blessures 

causées par le mouvement violent de la lance.

14. Never make adjustments on machine while in 

operation.

15. Be certain all quick coupler fittings are secured 

before using pressure washer.

WARNING: High pressure 
developed by these machines will 
cause personal injury or 
equipment damage. Keep clear of 
nozzle. Use caution when oper-
ating. Do not direct discharge 
stream at people or animals, or 
severe injury or death will result. 

AVERTISSEMENT: La haute 
pression générée par ces 

machines causera des lésions corporelles ou des 
dommages à l'équipement.  Se tenir à l'écart de la 
buse. Faire preuve de prudence lors de l'utilisation. 
Ne pas décharger directement le jet vers des 
personnes ou des animaux, car cela risquerait de 
causer des blessures graves ou même la mort.

Landa SLT/SLX Kubota Diesel Operator’s Manual  9.807-540.0 - E

WARNING

RISK OF INJURY. 

HOT SURFACES 

CAN CAUSE BURNS

WARNING

TRIGGER GUN KICKS 

 BACK —  HOLD WITH 

        BOTH HANDS

CAUTION

HOT DISCHARGE FLUID:

DO NOT TOUCH OR

DIRECT DISCHARGE

STEAM AT PERSONS.

WARNING

RISK OF INJECTION 

OR SEVERE INJURY

TO PERSONS. KEEP 

CLEAR OF NOZZLE.

Содержание SLT Series



























Отзывы: