8.917-208.0 • HOT Operator Manual • Rev. 03/12
OPERA
T
OR’S MANU
AL
PRESSURE W
ASHER
8
ASSEMBLY INSTRUCTIONS
STEP 1:
Connect the power cord
into the proper electrical out -
let, then push in the GFCI reset
button. (Re fer to se ri al plate for
information.)
STEP 2:
Connect high pressure
hose to discharge nipple by slid -
ing quick coupler collar back. (If
de ter gent is to be ap plied, insert
a de ter gent injector.) Insert quick
coupler onto dis charge nipple and
se cure by pushing quick coupler
collar for ward.
STEP 3:
Attach the high pres -
sure hose to the spray gun using
tefl on tape on hose threads. Move
safety latch into locked position.
STEP 6:
Check oil level by using
sup plied dip-stick. Use SAE 30W
non-de ter gent only.
STEP 7:
Fill fuel tank with proper
fuel.
89172080-9
STEP 5:
Release the coupler
collar and push the nozzle until
the collar clicks. Pull the nozzle to
make sure it is seated properly.
89172080-3
89172080-4
Detergent
Injector
STEP 4:
Pull the spring-loaded
col lar of the wand coupler col-
lar back to in sert your choice of
pressure noz zle.
Caution: Never
replace noz zles with out engag-
ing the safe ty latch on the spray
gun trig ger.
89172080-5
89172080-6
89172080-7
89172080-8
Safety
Latch
High
Pressure
Hose
Spray
Gun
High
Pressure Hose
Discharge
Nipple
Pressure
Nozzle
Dipstick
Pressure
Nozzle
Wand Coupler
Collar
Fuel
Cap
Dipstick
Coupler
Collar