Landa 1.103-900.0, Руководство оператора

Страница: 9 / 23

9
Operations
Assembly Instructions
STEP 1: Location of machine is
important. Avoid installing near
combustible material or in poorly
ventilated areas.
Connect the power cord into the
proper electrical outlet, then push
in the GFCI reset button. (Refer to
serial plate for information.)
STEP 4: Pull the spring-loaded
collar of the wand coupler collar
back to insert your choice of
pressure nozzle.
CAUTION: Never replace nozzles
without engaging the safety
latch on the spray gun trigger.
ATTENTION: Ne jamais
remplacer les buses sans
d'abord mettre le dispositif de
sécurité sur la détente du
pistolet pulvérisateur.
STEP 2: Connect high pressure
hose from the attached pressure
washer (not included) to the hot
water discharge nipple by sliding
quick coupler collar back. Insert
quick coupler onto discharge nipple
and secure by pushing quick
coupler collar forward.
(See Component Identification)
STEP 5: Release the coupler collar
and push the nozzle until the collar
clicks. Pull the nozzle to make sure
it is seated properly.
STEP 3: Attach variable pressure
control wand to spray gun using
teflon tape on threads to prevent
leakage. Position safety latch to
prevent trigger from being pulled.
Landa HS Operator’s Manual 8.913-943.0 - P
Trigger
Gun
High Pressure
Hose
Safety
Latch
Trigger
Wand
High
Pressure
Nozzle
Wand
Coupler
Collar
Wand
Collar
Pressure
Nozzle