Land Pride RCP2660, Руководство оператора

Страница: 62 / 74

Section 8: Maintenance & Lubrication
Table of Contents
11/2/18 RCP2660, RCPM2660, RCP3060 & RCPM3060: Parallel Arm Rotary Cutter: 316-111M:
58
Jack Stands Lowered for Storage
Figure 8-6
30032
Long-Term Storage
Refer to Figure 8-6:
Clean, inspect, service, and make necessary repairs to
the implement when storing it for long periods and at the
end of the season. This will help ensure the unit is ready
for field use the next time you hook-up to it.
1. Store control stick in a clean dry location. Do not
leave it out in the rain. Clean control stick with a
damp rag. Do not submerge control stick in water or
clean with high pressure wash.
2. Clean off any dirt or grease that may have
accumulated on the deck, deck motor, and on any of
the moving parts. Scrape off compacted dirt from the
bottom of the deck and then wash the surface
thoroughly with a garden hose.
3. Check blades and blade bolts for wear and replace if
necessary. See “Rotary Cutter Blades” on page 54.
4. Inspect for loose, damaged, or worn parts and adjust
or replace as needed.
5. Lubricate as noted in “Section 8: Maintenance &
Lubrication” on page 54.
6. A coating of oil may also be applied to the lower deck
area and to any exposed hydraulic cylinder rods to
minimize oxidation.
7. Store the cutter in a clean dry place with deck
positioned on a flat surface.
8. Retracted parallel arms, raise deck up and hook
transport safety chain to the deck hook.
9. Remove hitch pins (#1), lower jack stands (#2) to a
suitable 3-point height. Replace hitch pins (#1).
10. Ensure that the main frame is stable. Use auxiliary
supports or posts if necessary to prevent the
possibility of the unit tipping over.
11. Replace all damaged or missing decals.
12. Follow all unhooking instructions on page 38 when
disconnecting tractor from the Parallel Arm Rotary
Cutter.
Repaint parts where paint is worn or scratched to prevent
rust. Aerosol Buckskin touch-up paint is available from
your Land Pride dealer.
Land Pride Touch-up Paint
Part No. Part Description
821-011C PAINT LP BEIGE SPRAY CAN
821-070C PAINT GP GLOSS BLACK SPRAY CAN