Land Pride RCF3696, Руководство оператора

Страница: 29 / 76

25
Section 1: Assembly & Set-Up
RCF3696, RCFM3696, RCF3610, & RCFM3610 Rotary Cutters 326-600M
Table of Contents
8/20/21
RCF(M)3610 Tailwheels (Semi-Mount)
Refer to Figure 1-16:
1. There are several cylinder mounting lugs (#5) that
can be installed on axle (#1). Refer to
NOTES IN
BOLD in Figure 1-16 to make sure your cutter is
equipped with the correct mounting lug and that the
notch in the lug is located on the axle properly. See
your nearest Land Pride dealer if it is not correct.
2. Attach left and right-hand tailwheel arms (#2) to axle
tube (#1) with 5/8"-11 U-bolts (#4) and hex flange
locknuts (#3). Do not tighten locknuts.
3. Adjust tailwheel arms to desired locations and
tighten locknuts (#3) to the correct torque. When
completed, the tailwheel arms should be equal
distance from center line of hydraulic lift cylinder.
4. Continue with
“Hitch Hook-Up (Semi-Mount)”
on
page 26.
NOTE:
If preferred, rear guards may be assembled
before the tailwheels. See “Assembly of Optional
Equipment”
on page 36 for rear guard instructions.
35026
RCF(M)3610 Model With 15" Tailwheel Assembly
35024
RCF(M)3610 Model With 21" Tailwheel Assembly
RCF(M)3610 Semi-Mount Tailwheel Assembles
Figure 1-16