Land Pride RCB5710 Скачать руководство пользователя страница 79 | Manualshive

Страница: 79 / 84

background image

Section 7: Features & Benefits

RCB(M)5710 & RCB(M)L5710 Rotary Cutters 337-049M

7/9/20

75

Table of Contents

Features

Benefits

Wheel options

Laminated tires:

Eliminates flats.

Air-filled tires:

Give better cushion while transporting.

Foam-filled tires:

Give better cushion while transporting and can’t go flat.

LP Performance Hitch

TM

(Optional)

One person Hook-up. Great for uneven terrain, reduces drawbar wear. Hitch pivots
freely up and down and pivots about the tractor drawbar up to 12 degrees in both left
and right directions.

Bar-Tite hitch (Optional)

Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.

Maintenance free tongue & axle pivots

Self lubricating journal bearings make for less maintenance.

Color-coded hydraulic hose handles

Easy hose identification & sturdy handle to easily connect & disconnect from tractor.

Hydraulic hose holders

Tongue mounted hose holder keeps hose tips out of the dirt.

Greasable cast steel, continuous
hinges

Cast steel hinges make a strong connection & are easy to lubricate.

Center axle options

HD Single suspension center axle:

Spring cushion at the cylinder for cushion with

least amount of moving parts.

Independent suspension wing axles:

Offers additional suspension support on the

wing axle.

Walking tandem center axle:

Designed for versatility over a multitude of terrains.

Parallel pivot center axle:

Provides unmatched ground contact for hill-like terrains.

Wing axle option

Independent suspension wing axle:

Offers additional suspension support on the

wing axle.

Walking tandem wing axle:

Designed for versatility over a multitude of terrains.

Parallel pivot axle:

Provides unmatched ground contact for hill-like terrains.

Dual-acting fold cylinder (Optional)

Allows for a narrow transport width of 7'-3" (2.21 m).

Flip spacers

Easily change cut height with a flip of a spacer.

SMV Mounting Socket (Standard)

SMV Sign (Accessory)

SMV mounting socket receives most SMV signs equipped with a mounting blade for
ease of attachment and removal when transporting on a truck or trailer.
SMV sign is offered as an accessory when the tractor’s SMV sign and mounting
blade does not fit the cutter’s standard SMV mounting socket.

RCB(M)5710 & RCB(M)L5710 Models

«
...
77
78
79
80
81
...
»

Содержание RCB5710





















































































Отзывы:

Нет отзывов

Похожие инструкции для RCB5710

GATOR ESG105LXR

Бренд: Greenlee Страницы: 48

Бренд: Textron Страницы: 14

Бренд: D-CUT Страницы: 6

Бренд: Land Pride Страницы: 44

Бренд: ATIKA Страницы: 98

Бренд: Miller Electric Страницы: 28

Бренд: Renz Страницы: 9

Бренд: Vinyl Systems Страницы: 18

Бренд: Hypertherm Страницы: 130

Бренд: EINHELL Страницы: 4

Alpha-Tools FSM 180

Бренд: EINHELL Страницы: 34

Бренд: EINHELL Страницы: 152

Бренд: Zenoah Страницы: 24

Бренд: Zenoah Страницы: 42

Бренд: Felker Страницы: 44

Бренд: Husqvarna Страницы: 24

Бренд: Bosch Страницы: 29

Бренд: EASTMAN Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды