manualshive.com logo in svg

Land Pride Post Hole Diggers HD25, Руководство оператора

Поделиться
Скачать
Land Pride Post Hole Diggers HD25 Скачать руководство пользователя страница 35

31

Section 4: Options

7/31/17

HD25 and HD35 Hydraulic Post Hole Diggers 317-076M

Table of Contents

Required hardware, hydraulic hoses, and fittings are 
included. Quick release couplers are not included. See 

“Skid/Loader Mount Assembly” 

on page 11 for detailed 

instructions. 

Part No. & Description

317-205A

QA MOUNT W/ 24' HOSES

Skid Steers/Track Loader Mount

Refer to Figure 4-21:

Your HD 3-Point Mount or HD Bucket Mount Post Hole 
Digger can be converted to a Skid Steer Mount by 
purchasing Land Pride’s Quick Attach Mount with 8' 
Hoses and attaching your existing hydraulic motor, 
gearbox, and auger assembly (not shown) to the unit. 

Required hardware, hydraulic hoses, fittings, and quick 
release couplers are included. See 

“Skid/Loader Mount 

Assembly” 

on page 11 for detailed instructions. 

Part No. & Description

317-206A

QA MOUNT W/ 8' HOSES

HD25/35 QA Mount (Accessory)

Refer to Figure 4-22:

With the HD25/35 QA Mount (#1), the HD 3-Point Mount 
or HD Bucket Mount can be converted to a quick hitch 
mount for tractor front loaders, skid steers, or track 
loaders. The existing hydraulic motor/spring/gearbox/
auger assembly, fittings, and couplers are assembled to 
the HD25/35 QA Mount. 

The customer must always supply new hydraulic hoses 
and fittings when converting the HD 3-Point Mount to the 
HD25/35 QA mount. 

The customer can use the existing hydraulic hoses and 
fittings when converting the HD Bucket Mount to the 
HD25/35 QA mount for a tractor front loader. 

The customer must supply short hydraulic hoses with 
sleeves and fittings when converting the HD Bucket 
Mount to the HD25/35 QA mount for a skid steer or track 
loader. 

To complete the conversion, the customer may also 
chose to purchase the gearbox rest assembly (#2) and/or 
clevis and pin assembly (#3). 

See 

“Skid/Loader Mount Assembly” 

on page 11 and 

“Skid/Loader Hose Assembly” 

on page 12.

Part No. & Description

317-203A

HD25/35 QA Mount Assembly (#1)

317-204A

Gearbox Rest Assembly (#2)

317-196A

Clevis and Pin Assembly (#3)

NOTE:  

Part No. 317-205A does not include 

hydraulic motor, gearbox, and auger assembly.

NOTE:  

Part No. 317-206A does not include 

hydraulic motor, gearbox, and auger assembly.

Tractor Front Loader Quick Hitch Mount

Figure 4-20

Skid Steers & Track Loader Quick Hitch Mount

Figure 4-21

HD25/35 QA Mount, Gearbox Rest, & Clevis & Pin

Figure 4-22

35996

35996

35996

Содержание Post Hole Diggers HD25















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды