Land Pride BS30, Руководство оператора

Страница: 16 / 30

Section 1: Assembly & Set-up
Table of Contents
12/7/18 BS30, BSE30, BS40, BSE40, BS50, & BSE50 For Skid Steers and Tractors With Front Loaders Bale Spears 319-
12
Hook-Up Bale Spear
DANGER
!
To avoid serious injury or death:
A crushing hazard exists while hooking-up and unhooking attachment. Do not allow anyone to stand between attachment and
power machine while approaching or backing away from the attachment. Do not operate lift and/or tilt controls while someone
is near the power machine and/or attachment.
Bale Spear With Euro Hitch Plates
Figure 1-4
Hook-Up to Euro Hitch
Refer to Figure 1-4:
WARNING
!
To avoid serious injury or death:
Check Euro style hitch fit-up frequently to make sure it is
properly secured under the attachment’s hooks and lock pins
are fully extended into the locking lugs. An improper fit-up can
result in the attachment coming loose and falling.
1. Lower Euro hitch on front of loader down as far as
possible.
2. If required, manually move locking handle until
locking pins are fully retracted and ready for hook-up.
3. Carefully drive up to Bale Spear upper hooks until
mounting bar and hook guides on the Euro hitch are
aligned under the Bale Spear hooks.
4. Raise Euro hitch up until mounting bar is completely
captured inside the Bale Spear hooks.
5. Continue to raise Euro hitch up to allow bottom of
Bale Spear frame to swing in until pin holes in locking
lugs align with locking pins in Euro hitch. If
necessary, rotate top of Euro hitch back to help align
pin holes with locking pins.
6. If pins do not auto-lock into pin holes, then manually
operate Euro hitch lever to push locking pins into the
pin holes. Make sure lever is locked to keep pins from
backing out.
37473
Bale Spear With Skid Steer/Loader Hitch Plates
Figure 1-5
Hook-Up to Skid Steer/Loader Hitch
Refer to Figure 1-5:
WARNING
!
To avoid serious injury or death:
Check hitch fit-up frequently. An improper fit-up can cause the
attachment to come loose from the loader hitch plate and fall.
1. If needed, pull locking handles up on skid steer/
loader hitch until locking pins are fully up and ready
for hook-up to Bale Spear.
2. Carefully drive up to the Bale Spear making sure the
skid steer/loader hitch is parallel with Bale Spear top
angles.
3. Rotate top of loader hitch plate slightly forward.
4. Place top of skid steer/loader hitch under the top
angled bars on the Bale Spear hitch plates.
5. Slowly lift skid steer/loader hitch up until top angle
bars and skid steer/loader hitch have come together.
6. Rotate top of skid steer/loader hitch back to align
bottom slots in the Bale Spear hitch plate with locking
pins in the skid steer/loader hitch.
7. Push lock handles on skid steer/loader hitch down
ensuring lock pins have engaged in bottom slots of
the Bale Spear hitch plate and handles are locked
down.
37472