Land Pride BB4596, Руководство оператора

Страница: 24 / 32

Section 3: Optional Equipment
BB4596, BB4510, & BB4512 Pull Type Drag Scraper 306-096M 11/28/18
20
Table of Contents
Standard or Tilt Axle
The Pull Type Drag Scraper can be purchased with either
a standard or tilt axle. The standard axle is for doing level
work only. The tilt axle can do both level work and angle
work.
Standard Axle
Refer to Figure 3-1:
The Standard axle has one lift cylinder for raising and
lowering the unit. Included with the axle and tires are
three pivot bolts for attaching the unit to the moldboard,
one hydraulic lift cylinder and two hydraulic hoses.
Customer to supply two quick connect couplings for
attaching hoses to the tractor.
Tilt Axle
Refer to Figure 3-2:
The Tilt axle has two cylinders. The lift cylinder raises
and lowers the unit. The tilt cylinder raises the left side up
giving the grader blade an angle for sloping, terracing,
and ditching work. The right side point can extend below
grade by as much as 7" with BB4596, 7 5/8" with BB4510,
and 8 1/4" with BB4512. Included with the axle and tires
are three pivot bolts for attaching the unit to the
moldboard, one hydraulic lift cylinder, one hydraulic tilt
cylinder, and four hydraulic hoses. Customer to supply
four quick connect couplings for attaching the hoses to
the tractor.
Weight Box
306-135A BB4596 Weight Box
306-114A BB4510 & BB4512 Weight Box
Refer to Figure 3-3:
A weight box can be added to the standard axle or tilt axle
to help force the blade into hard material. It adds
approximately 760 lbs. to the scraper when filled with
concrete. Hardware for attaching the weight box to the
axle is included.
Section 3: Optional Equipment
Standard Axle
Figure 3-1
Tilt Axle
Figure 3-2
Weight Box
Figure 3-3
27995
27996
27997