Introduction
BB4596, BB4510, & BB4512 Pull Type Drag Scraper 306-096M
11/28/18
6
Owner Assistance
The dealer should complete the Online Warranty
Registration at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your Pull Type Drag Scraper have been
specially designed by Land Pride and should only be
replaced with genuine Land Pride parts. Contact a Land
Pride dealer if customer service or repair parts are
required. Your Land Pride dealer has trained personnel,
repair parts, and equipment needed to service the
implement.
Serial Number
For quick reference and prompt service, record model
and serial number on the inside cover page and again on
the warranty page. Always provide model number and
serial number when ordering parts and in all
correspondences with your Land Pride dealer. For
location of your serial number plate, see Figure 1.
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new drag
scraper. If for any reason you do not understand any part of this
manual or are not satisfied with the service received, the
following actions are suggested:
1.
Discuss any problems you have with your implement
with your dealership service personnel so they can
address the problem.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem, and request assistance.
3. For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
27984
Introduction
Land Pride welcomes you to the growing family of new
product owners. This Pull Type Drag Scraper has been
designed with care and built by skilled workers using
quality materials. Proper assembly, maintenance, and
safe operating practices will help you get years of
satisfactory use from this product.
Application
The Land Pride BB4596, BB4510 & BB4512 Pull Type
Drag Scrapers with standard axle is designed for moving
large quantities of material, leveling, and finish grading.
Scrapers with tilt axle can do everything the standard
axle does and also remove material on an angle for
sloping, terracing, and ditching. Material can be
transferred by dragging it to a nearby location and then
raising the scraper to deposit the load. Surfaces can be
graded and leveled by scraping material from high areas
and allowing accumulated material to flow out from under
the grader blade in low areas.
The Pull Type Drag Scrapers have applications in
feedlots, outdoor arenas, building sites, farm
maintenance, and private roadways.
See “
Specifications and Capacities
”
“
Features and Benefits
” on page 25 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator’s or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com
Terminology
“Right” or “Left” as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.
Definitions
IMPORTANT:
A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
NOTE:
A special point of information that the
operator should be aware of before continuing.
