Land Pride AFM4522, Руководство оператора

Страница: 23 / 58

Section 1: Assembly & Setup
Table of Contents
AFM4522 All-Flex Grooming Mower 315-360M 11/18/21
19
Center Deck Hook-up
Figure 1-9
15577
Install Center Deck
Refer to Figure 1-9:
1. Remove 2 center deck front mounting pins (#2) from
transport frame pivot tubes (#8).
2. Loosen the 16 mounting bolts (#6) that secure the
gauge wheel mounting frames to the center deck.
3. Roll center deck forward to align front mounting tubes
(#7) with transport frame pivot tubes (#8).
4. Move storage screw jack from transport frame to jack
stob (#1) centered on the gearbox channel. Make
sure jack retaining pin has been fully inserted to
prevent jack from slipping off of the jack stop. Extend
jack to level the center deck.
5. Install 2 center front mounting pins (#2) to attach
center deck to transport frame.
6. Install C-spacers (#3 & #4) to mounting pin s (#2) as
shown. Use grooves at the bottom of the rods to
install the lower spacers. See also Figure 2-4 on
page 26 for a detailed description.
7. Secure c-spacers at the top with linchpins (#5).
8. Tighten all hardware using torque requirements on
page 52.