Land Pride 315-507M Скачать руководство пользователя страница 33

Страница: 33 / 58

Section 3: Operating Instructions

Table of Contents

AFM4211 All-Flex Grooming Mower 315-507M

3/8/23

Fold Mower Decks

Refer to Figure 3-2 or Figure 3-3:

1. If the deck drivelines do not have slip clutches, then

check U-joint timing before folding the decks up.

Refer to

“U-Joint Timing”

on page 28.

2. Using tractor’s hydraulic control lever, raise all three

mower decks to transport position by retracting all

three hydraulic cylinders (#2) completely.

3. As the mower decks are raising, the three transport

locks (#1) will automatically lock in place. Make sure

they have locked in place before transporting.

Unfold Mower Decks

The mower is furnished with either manual transport

locks or optional hydraulic transport locks. Manual

transport locks are released with a pull rope. Hydraulic

transport locks are released when using the hydraulic

control lever to raise and lower the mower decks.

Unfold Decks With Pull Rope Locks

Refer to Figure 3-2:

1. Fully retract hydraulic cylinders (#2) to remove weight

from transport locks (#1).

2. Pull transport lock rope (#3) toward the tractor to

disengage transport locks (#1).

3. Hold locks in this disengaged position until all three

mower decks have unfolded enough to allow locking

lugs (#4) to be out from under transport locks (#1).

4. Extend all three cylinders (#2) to their maximum

stroke for maximum field float of mower decks.

Unfold Decks With Hydraulic Locks

Refer to Figure 3-3:

1. Using the tractor’s hydraulic control lever, fully retract

all hydraulic cylinders (#2) to remove weight from

transport locks (#1).

2. After hydraulic cylinders (#2) have fully retracted,

extend hydraulic cylinders (#2). The transport lock

hydraulic cylinder (#3) will extend first and will open

all three transport locks (#1) before hydraulic

cylinders (#2) start to extend.

3. Continue to extend all three cylinders (#2) to their

maximum stroke to utilize maximum flexibility of the

decks as they float over the terrain.

IMPORTANT:

Make sure deck floating pins are

removed before unfolding AFM4216 mower decks.

IMPORTANT:

When unfolding mower, fully extend

cylinders to utilize maximum flexibility. Damage to

mower may occur if cylinders are not fully extended.

U-Joint Timing

Figure 3-1

Illustration Shown With Pull Ropes

See Figure 2-5 on page 26 For Optional Hydraulics

Figure 3-2

Hydraulic Transport Locks

Figure 3-3

13660

35472

Содержание 315-507M



























































Результаты поиска

Содержание 315-507M

Отзывы:

Похожие инструкции для 315-507M

Бренды по названию

Популярные бренды

Land Pride 315-507M, Руководство оператора

Результаты поиска

Содержание 315-507M

Отзывы:

Похожие инструкции для 315-507M

Бренды по названию

Популярные бренды