Tel:
Internet:
1800 28 44 46
www.carecompany.com.au
Page 7/7
Manual
–
ARZ Decontamination showers
©2021
Version 02
5. Care and Repair Instructions
5.1 General Information
Never pack the shower when it is wet or humid!
– allow to dry
completely before packing away.
5.2 Cleaning
Only take common gentle cleaning soap.
a) Cleaning all textile parts with tepid, gentle soap-water and use a soft
sponge. Always rinse with clear water completely and let it dry in the
air. Please read and act according to cleaning advises for the fabric
when you cannot remove dirt this way.
b) Clean dirty in- and deflation valves and relief valves the same way as
above. In case that a valve is not airtight anymore, please follow step
5.4.
5.3 Repairing of Holes and Fissures
Repairing of holes and fissures at the shower frame, groundsheet or roof
can be done with the included repair set according to its instructions.
5.4 Valve Check
Isn’t a valve airtight anymore, may be dirt under the gasket, which can
removed as described:
a) Exhaust all air.
b) Fill valve with warm soap-water.
c) Press valve tappet: in- and deflation valve from the front, the relief
valve must be pressed from the back through the air beam right in the
middle.
d) The soap-water should flow into the air beam.
e) Inflate the tube until the valve opens definitely. Check in- and deflation
valve if they are tight.
f) If the valve still not working properly, it probably needs to be changed.
