ABOUT THIS DISPENSER
The dispenser has its own cooling and air compression system and can house up to 4 kegs
of product. Only the top two kegs can be connected to the tower, and up to two taps can be
used on this dispensing unit (two taps mounted on 1 tower).
CONSIDER LOCATION OF THE FOLLOWING PRIOR TO INSTALL
Drain
Grounded electrical outlet.
Heating and air conditioning ducts
Enough space to install the dispenser. A minimum of 1 inch on all sides is required.
ACCESSORIES
Beer Keg Racks (2)
Keg Containers (2)
Tower
Taps (2)
Tap handles (2)
Casters (2 with brakes, 2 without brakes)
5
PRE-INSTALLATION CHECKLIST
BEFORE GETTING STARTED
Each unit is tested under operating conditions and is thoroughly inspected before
shipment. At the time of shipment, the carrier accepts responsibility for the unit. Upon
receiving the unit, carefully inspect the carton for visible damage. If damage exists, have
the carrier note the damage on the freight bill and file a claim with carrier. Responsibility for
damage to the dispenser lies with the carrier.
AIR FILTER
TEMPERATURE CONTROL
KEG
KEG CLOSURE
AIR LINE
BEER TUBING
KEG CONNECTOR
RACK
CUP REST
STAGE
TOWER
TAP
TAP HANDLE
CABINET DOOR WITH
USAGE INSTRUCTIONS
BEER TUBING
KEG RACKS
CASTERS
SUPPORT
TOWER
TAP
