2.
OPERATING THE UNIT
2.1
PRODUCT LOADING/UNLOADING
A. Thaw the Minute Pak
®
in a 40 degree
F cooler for 48-72 hours.
B. Shake the Minute Pak
®
well (see
Figure 1).
3
D. Open dispenser door (press the
#
key)
(see Figure 3). Then lift the door.
E. Install the Minute Pak
®
into the slot for the appropriate flavor.
F.
Insert check valve into the Minute Pak
®
opening (see Figures 4 and 5).
Figure 4
G. Prime pump using the
*
key.
H. Dispense enough juice to prime the
pump (see Figure 6), until the dispensed
beverage appears consistent [dispense
approximately two to four (2-4) ounces of
product].
Figure 3
Figure 1
Figure 2
C. Turn unit to “Flush Mode” (key on
right bottom side of dispenser) (see
Figure 2).
Figure 5
Figure 6
