2.7
PORTION CONTROL PROGRAMMING (MVU) (NO TOP-OFF)
2.
Multiple brands can be programmed at the same time to pour the same amounts for each
size during this step.
Do this by selecting several brand buttons; however, the first button selected will illuminate
and only its beverage will pour. The other brands selected will flash slowly.
3.
If multi-brand programming, do not set carbonated drinks and non-carbonated drinks at the
same time because carbonated drinks will foam.
NOTE:
The LED will blink twice and turn off if the brand has been programmed as a flavor shot
instead of a drink. You will need to reprogram the brand as a drink prior to setting the
portion.
C. Fill cup 1/3 full with ice and place it under
the nozzle, push and hold a drink “size”
button until the cup is full.
1. Once the pour is completed, the LED will
blink slowly to indicate that a new pour
duration has been programmed for that
key.
Press the Brand button.
1. The selected brand’s LED will illuminate.
A. Press the S and XL at the same time for
five seconds to enter the portion setting
mode.
1. The Pour/Cancel light will illuminate and
the shot light will blink two times.
14
P.N. 28-0720/05
