Lanaform Aroma Globe, Руководство пользователя

Страница: 5 / 12

EN
To clean the transducer:
1) Pour 2 to 5 drops of vinegar on its surface and leave for 2 to 5 minutes.
2) Brush the scale off the surface with a soft brush. Do not use a hard tool to scratch at the surface.
3) Rinse the tank with fresh water.
4) Do not use soap, solvent or any other cleaning spray to clean the transducer.
To clean the tank unit:
1) Clean the water basin using a soft cloth and vinegar if there is any residue or calcium deposit inside.
2) Rinse the tank with clear water.
Storage :
Store the device in a dry cool place, out of reach of children after it has been cleaned and dried.
TROUBLESHOOTING
If the device is not working correctly, under normal conditions, consult the following table:
Breakdown Possible causes Remedies
No vapour, no indicator light
If no light I being emitted. Check that the device is plugged in
and that there is not a problem with
the mains supply.
The water level in the tank is too low. Add water to the tank.
The top for adjusting the power
of the vapour is not in the correct
position.
Reposition it correctly.
The cable passes above the
transducer.
Reposition it correctly.
The water tank is leaking. Check that the rubber stopper is
positioned correctly.
The temperature of the device is
too low.
Place the device in the room at
room temperature for half an hour
prior to use.
The vapour has an unusual smell The water has been in the tank too
long.
Clean the tank and fill with fresh
water.
Low intensity
Too much/little water in the tank. Empty (fill) the water tank up to the
maximum level.
Sediment on the transducer. Clean the transducer.
The water is too cold. Use water at room temperature.
The water is unclean. Clean the tank and fill with fresh
water.
6