Lamtec GFI 48, Руководство по эксплуатации

Страница: 10 / 70

9
2 General Safety Instructions
2.4 Proper Use - Conditions of Use
Intended use
The ignition burner is utilised in industrial ovens, thermal processing systems and heating boil-
ers for gas, oil and solid fuels.
It is used for the following purposes:
• Preheating the system
• Igniting the main burner
• Supporting the main burner flame
The ignition burner is intended only for the described use.
Any use going beyond the intended use shall be deemed improper.
The LAMTEC GmbH & Co KG shall not be liable for damage caused by the non-compliance.
2.5 Installation Notes
WARNING!
All following warnings must be observed to avoid personal injury and damage to
property and the environment..

Supply the feed cable with L, N and PE only. The neutral conductor may not have any
potential difference to PE.

Phase and neutral conductors may not be interchanged (this would lead to dangerous
malfunctioning, loss of protection against contact, etc.).

The supply cable of the integrated flame scanner must absolutely be fused with a 4 A
(slow) fuse. The minimum fusing amounts to 0.5A..