© Lampert Werktechnik GmbH
2012
5
4.2 DESCRIPTION OF THE REAR OF THE DEVICE
(Fig. 2)
(1)
FUSEBOX ("Fuse")
(2)
MASTER MAINS SWITCH as well as
AC POWER SOCKET
(for connecting the mains cable)
(3)
CONNECTION SOCKET FOR EYE PROTECTION
SYSTEM
(4)
CONNECTION SOCKET FOR FOOT SWITCH
(optional accessory)
(5)
CONNECTION SOCKET FOR LED MICROSCOPE
ILLUMINATION
(6)
TYPE PLATE
(7)
CONNECTION SOCKET FOR PIN MODULE
(8)
CONNECTION SOCKET FOR ACTIVATED
CARBON ABSORBER (optional accessory)
(9)
SERIAL NUMBER
(10) PROTECTIVE GAS CONNECTION ("ARGON
GAS")
for 6.0 mm diameter pressure hose
(11) APPROVED MAINS VOLTAGE FOR THIS DEVICE
4.3 CONNECT EYE PROTECTION AND LED ILLUMINATION FOR THE SM04 WELDING MICROSCOPE TO THE
PUK04:
The circular connector for the eye protection system
should be inserted into the connecting socket (3) marked
with the red eye protection symbol on the rear side of the
device and is to be tightened in place with the coupling nut
(hand tight). The LED illumination connector should be
inserted into the connecting socket (5) marked with the
yellow illumination symbol on the rear of the PUK welding
device. In doing so, observe the colour coding of the
connection cables.
WARNING!
ONLY SUITABLE ORIGINAL EYE PROTECTION
SYSTEMS FROM LAMPERT MAY BE CONNECTED TO
THE WELDING SYSTEM!
OTHER EYE PROTECTION SYSTEMS ARE NOT
APPROVED AND CAN LEAD TO PERMANENT HEALTH
DAMAGE OR DAMAGE TO THE WELDING DEVICE.
ALWAYS OBSERVE THE OPERATING INSTRUCTIONS FOR THE CONNECTED EYE PROTECTION SYSTEM
4.4 CONNECT SHIELDING GAS SUPPLY:
Fasten the suitable flow regulator to the shielding gas
tank. ATTENTION: In doing so, always observe the
enclosed special operating instructions provided. (Where
possible, use argon with min. 99.8% purity, e.g. "Argon
4.6"). The pressure hose is to be fastened by hand with
the help of the quick coupling adapter to the flow regulator
as well as the shielding gas connector (10) on the rear of
the device.
CHECK REGULARLY THAT ALL OF THE HOSE CONNECTIONS AND GAS HOSES ARE IN OPTIMAL
CONDITION, ARE PROPERLY FASTENED AND ARE AIRTIGHT!
