© Lampert Werktechnik GmbH
2012
18
REPAIR
If the stereo microscope requires repair or adjustment by
qualified personnel, we recommend sending it back to the
dealer in its original packaging. Include a description of the
problem or the desired adjustment.
WARNING: THE DEVICE MAY ONLY BE OPENED BY A QUALIFIED ENGINEER!
11. SPARE PARTS LIST
Hand piece
(40)
Nozzle (D 5mm)
(41)
Clamping nut
(42)
Chuck
(43)
Hand piece complete
Electrodes:
10 x electrodes D 0.5 mm (thorium oxide free),
incl. diamond grinding disk
Grinding disk:
diamond grinding wheel
Gas hose:
3m gas hose 6x4mm
100 150
100 152
100 151
100 100
100 400
100 701
100 153
PLEASE NOTE!
Nozzle
(40), clamping nut (41), electrodes and clamping tongs (42) are wearing parts and are not covered by the
guarantee.
12. DISPOSAL INFORMATION:
Render discarded devices unusable by removing the
mains cable.
Only for EU countries: In accordance with EU directive
2002/96/EC regarding the disposal of used electrical and
electronic equipment, discarded electrical devices must be
separated and collected and sent for recovery in an
environmentally friendly manner.
13. EC – DECLARATION OF CONFORMITY
The manufacturer
“Lampert Werktechnik GmbH”
Ettlebener Str. 27, D-97440 Werneck
declares herewith that the following products:
"PUK04" fine welding device and welding microscope
"SM04"
comply with the stipulations of the directives identified
below - including any changes applicable at the time of
this declaration.
Applicable EC directives:
Per low voltage directive 2006/95/EC
Per EMC directive 2004/108/EC
The following harmonised standards have been applied:
EN 60974-6, EN 379, EN 169
EN ISO 12100-1
EN ISO 12100-2
Werneck, 01.02.2012
Lampert Werktechnik GmbH
Andrea Bauer-Lampert (Managing Director)
Text and illustrations represent the technical status at the time of printing. Subject to change.
