6
4-2 CONTROLS, FUNCTIONS AND FEATURES - FRONT
(Fig. 1)
1 2 3 4
6 5.2 5.1
(1) BUTTON - PROGRAM MEMORY
(2) BUTTON - SWITCHING MODES
(3) ROTARY KNOB - IMPULSE LENGTH / WELDING TIME
(4)
ROTARY KNOB - WELDING POWER
(5) SOCKET ( - pole) 5.1 For the hand-piece 5.2 For resistance welding
(6) SOCKET ( + pole)
For connecting accessories designed to complete the electrical circuit (i.e. crocodile clip,
or other connecting cables)
LCD-DISPLAY
(7)
(8)
(9)
(10)
(7) Power in percent (%)
(8) Impulse length (welding time) in Milliseconds (ms)
(9) Current mode setting: Standard mode / Gap mode / HF-Pulse mode / Resistance
welding / Micro mode
(10) Program indicator P1 - P10
The foot switch function can be recognised by this symbol
↓
.
Please note:
In the following cases the machine will switch automatically to its standby
setting after 5 minutes:
-
If no weld has taken place during this time.
-
If the machine has not been otherwise operated or the parameters changed during
this time.
Whilst on standby, only 1 of the blue “Power” LEDs will light.
To switch the machine again to its operational mode, activate any one of the controls, or
complete the electrical circuit (contact the electrode with a work piece that is connected
