Lampert optiwelder T1, Руководство по эксплуатации

Страница: 3 / 15

2
TABLE OF CONTENTS
SECTION 1 – FIELD OF APPLICATION 2
SECTION 2 – INTRODUCTION
2
SECTION 3 – SAFETY RULES
3
3-1. General safety rules 3
3-2. Personal body protection and dangers 4
SECTION 4 – INSTALLATION
4
4-1. Set-up rules 4
4-2. Operations elements front side 4
4-3. Operations elements rear side 4
4-4. Starting up 5
SECTION 5 – INSTRUCTIONS 5
5-1. Welding instructions 5
5-2. In general and pointers 6
5-3. Sharpening the electrodes 6
5-4. Care and maintenance 6
SECTION 6 – TECNICAL DATA 7
6-1. Technical data 7
6-2. Picture Symbols – Identification plate 7
SECTION 7 – TROUBLE SHOOTING 8
SECTION 8 – SPARE PARTS LIST 9
SECTION 9 – EG-CONFORMITY DECLARATION
9
SECTION 1 – FIELD OF APPLICATION OPTI-WELDER T1:
(Intended Use)
•
Point welding on steel and steel alloys as well as
titanium and various NE metals and nickel alloys such
as brass, German silver, monel or EVO. Also suitable
for precious metals and precious metals alloys.
•
Not approved for welding dentures! (Dentistry)
•
•
Any usage other than herein specified is prohibited.
•
Do not use outdoors! Use only in a dry environment!
We are not liable for the durability of the welding
points. We recommend checking the welding points
and if necessary re-do the welding.
SECTION 2 – INTRODUCTION
The opti-welder T1 is the long missed link between over
elaborated welding techniques and laser techniques. This
unique precision welding device was created combining
intelligent coordination and precise mechanics. Smaller
dimension, lightweight and low energy requirements are advantageous and important facts. Outstanding ignition
and welding qualities offer a broad range of application. A
whole new world of production and repairing possibilities
opens up for all fixating and welding techniques.