■
The dimensions in case of the 90opening door are sho wn in the following figures. The dimensions in case of the 80opening door are sho wn in ( ).
MOUNTING DIMENSIONS
Fig. 4
Hinge center for slide hinge
(dimension standard plane)
S
A
=
134
ー
D
B
=
15
+
T
ー
0
W
=
Cabinet overall width
0
T
=
Cabinet side board thickness
W
=
Door width
S
=
Overlay
C
=
Distance from the side board inside surface
to the aluminum frame side surface
1
0
)
1
0
W
ー
W
(
2
C(1
〜
4mm
）
Rubber gasket thickness D (3-5 is recommended)
16
Glass
5.5 (from the door inside plane)
6
20
50
Side board
Aluminum frame
9
B (from the door
side end plane)
32
Fig. 5
A
157.5
ー
S
(167
ー
S)
173.5
ー
S
(183
ー
S)
32
115(124.5)
Step 4
Step 7
Step 5
Step 6
Bind tapping screw 3.5x15
(Tighten 4 screws of Step 2 and Step 7)
Truss screw M4x6
5
6
Truss screw M4x6
8
Fig. 10
Bind tapping screw 3.5x15
3.5
15
Step 2
Step 1
Step 3
Bind tapping screw
(Oblong hole for temporary fixing)
HDSN-30 body
Door
HDSN-SZ
Side board
Body mounting
plate
1
3
6
4
2
Fig.8
(Prepare separately)
Screws for fixing the mounting plate
HDSN-AZ
7
Fig. 3
Step 1.
Place the mounting plate
②
to the specifi ed position of the inside surface of
a cabinet and fi x it with the attached bind tapping screws 3.5x15
③
fi rmly.
Step 2.
●
In case of HDSN-SZ mounting plate (for solid wooden
door or 45mm width aluminum frame door )
Temporarily fi x the HDSN-SZ mounting plate
④
through its oblong hole to the
specifi ed position of the back of the door with the attached bind tapping screws
3.5x15
⑥
.
●
In case the HDSN-AZ mounting plate (for 20mm width
aluminum frame door)
The fi xing screws are not supplied. Prepare them separately (M3.5-4 is
recommended).Fix the HDSN-AZ mounting plate
⑦
with the prepared fi xing
screws fi rmly. (Fig. 4)
※
The HDSN-AZ mounting plate
⑦
should be mounted so that the distance (C)
between the side board inside surface and the aluminum frame side surface be
in the range of 1~4mm. (Fig. 5)
This drawing shows the case of installation to solid wooden door or 45mm width aluminum frame door (HDSN-SZ). As for the case of installation to
20mm width aluminum frame door (HDSN-AZ), refer to Fig. 4 and 5.
Step 3.
Put the hole of the HDSN-30 side body
①
to the axis of the body mounting
plate
②
, insert the unit body up to the root of the plate making click.
Never use a hammer or others like it in order to insert the mounting plate
into the HDSN-30 body
①
. Otherwise trouble or damage may happen.
Step 4.
Adjusting the axis of the HDSN-SZ mounting plate
④
and the hole in the
arm end, insert the truss screw M4x6
⑥
．
Step 5.
Check the door opening and closing function and adjust the position of the
HDSN-SZ mounting plate
④
through its oblong hole.
Step 6.
Remove the arm from the mounting plate. Then, fi x the plate fi rmly with the
bind tapping screw
⑥
into its circular hole.
Step 7.
Insert the arm into the axis of the mounting plate again and fi x the arm fi rmly
with the truss screw M4x6
⑤
. (Fig. 10 (HDSN-AZ)
Fig.7
This shows the installation procedure for the application of solid wooden door or 45mm width aluminum frame door (HDSN-SZ).
In case of the installation procedure for the application of 20mm width aluminum frame door (HDSN-AZ), refer to Fig. 9 and 10.
Fig.9
Door
Fig.6
Before installing the unit, mount the slide hinge to the specifi ed position and adjust it so that the door can be opened and closed smoothly.
The position adjustment of the slide hinge should be carried out before installing the HDSN-SZ or HDSN-AZ mounting plate. Otherwise the stay arm may be defl ected right or left as
shown in Fig. 6, which may result in trouble or damage.
■
INSTALLATION PROCEDURE
