1. Fill any unused section of the disk using slow, even
pressure. Add the sample water until the Blank
Chamber is full and the Over Flow Chamber is partially
fi lled.
Correct Fill
Blank
Chamber
Over Flow
Chamber
2. Do not overfi ll the disk. If the disk is overfi lled, sample
water will fl ow out of the vent hole in the center of the
disk. The disk is not leaking. Dry the disk and run the
test.
Over
Filled
(Dry disk before placing in meter)
Blank
Chamber
Over Flow
Chamber
3. Do not under fi ll the disk. If the disk is under fi lled, the
blank chamber will not be full. The reagent chambers
will not fi ll entirely and results will be inaccurate.
Under Filled
Blank
Chamber
4. Do not introduce air bubbles into the disk. The reagent
chambers will not fi ll entirely and results will be
inaccruate. Remove the water sample with the syringe
and refi ll.
Air Bubble
5. Wet disks should be dried thoroughly with a lint free wipe. Handle the disk by the edges.
Between tests store the disk on a fl at surface. Do not agitate a partially fi lled disk to avoid
leaking and contamination. Partially used disks should be discarded at the end of the day.
FILLING: MULTIPLE-USE DISK
Compatible with iPhone 6 Plus,
iPhone 6, iPhone 5s, iPhone 5c,
iPhone 5, iPad Air 2, iPad Air, iPad
mini 3, iPad mini 2, iPad mini, and
iPad (4th generation).
Compatible with Android devices.
DOS & DON’TS
¬
Hold syringe vertically when fi lling disks.
¬
Do not fi ll disk while in the meter. Fill disk on clean, dry surface.
¬
The disk should not contain any large air bubbles. Air bubbles will result in erroneous results.
¬
Only the Universal Disk Cover (Code 1719) can be used with the WaterLink
®
Spin Touch
™
.
¬
Empty syringe of previous sample before fi lling with next sample.
¬
Remove fi lled disk from meter after testing.
BLUETOOTH CONNECTION
The WaterLink
®
Spin Touch
™
is capable of connecting to a Bluetooth enabled device, such as a
phone or tablet, and the Mobile Bluetooth Printer. The Spin Touch will only connect to and print
from the LaMotte Bluetooth Printer [Code 5-0066]. Other Bluetooth printers are not supported.
Whenever the
button appears on the touch screen the Spin Touch is capable of connecting
to a Bluetooth enabled phone or tablet. The
will become highlighted when connected and
be dim when not connected. Whenever the
button appears on the touch screen the Spin
Touch is capable of connecting to the Mobile Bluetooth Printer. The
will be highlighted when
connected and dim when not connected. The Spin Touch cannot connect to both a phone or
tablet and the printer at one time.
For fi lling and troubleshooting tips go to:
www.waterlinkspintouch.com
See the WaterLink
®
Spin Touch
™
manual for additional information.
410-778-3100 | 800-344-3100
www.lamotte.com
Disk Patent No. 8,734,734
FCl Patent No. 8,987,000
TCl Patent No. 8,993,337
3580-QG 11.15.17
