LaMotte Martel 5-0067, Руководство пользователя

Страница: 7 / 8

LED Status Indicators
The LED indicators will report the condition of the printer. If there is a fault, the
LED indicators will flash in sequence. The fault can be identified by counting the
number of flashes.
LED Indication Condition Solution
On Printer On -
Off Printer Off -
Short flash every second Fast Charging -
* * * Paper out Replace paper
** ** ** Thermal head too hot Allow head to cool
*** *** *** Dead battery (no charge remaining) Recharge battery
**** **** **** Battery low (20% charge remaining) Recharge battery
Out of Paper
The printer will automatically detect when the printer paper has run out, and
report this using the Status LED. Use the Mode button to feed through the last few
inches of paper and insert a new roll.
Thermal Head Overheated
After extensive printing, the print head temperature may rise to an unusable level.
The Status LED will indicate when this occurs. Printing will be suspended until the
head temperature returns to normal levels.
Disposal
At the end of its working life the printer should be disposed of in accordance with
The Waste Electrical and Electronic Regulations (“the WEEE Regulations), if in use
within the EU, and in accordance with national requirements in other countries.