BLE METER FAMILY
Pairing Procedure
The Bluetooth Pairing option for the BLE series of meters is Option 1. The default
setting when the printer is received is Option 1 and no changes are required. If the
printer has been changed to Option 2 it must be reset to Option 1.
1.
Ensure the printer is OFF.
2.
Press and hold the Mode button while powering the printer ON. After about
five seconds, the Status light will flash five times to show that the printer is in
configuration mode. Release the Mode button.
3.
Press the Mode button four times to select Option 4.
4.
After a short delay, the Status light will flash four times to indicate that
Option 4 is selected. If you have made a mistake at this stage, simply wait.
After a delay, the printer will power-on without changing any options.
5.
To proceed with configuration, press the Mode button once to select Option 1.
6.
After a short delay, the Status light will flash once to show that Option 1 has
been selected.
7.
After a further delay, the printer will power-on with the new setting.
Printer Setup Procedure
1.
From the Setup Menu press
or
to scroll to Bluetooth Menu.
2.
Press
ENTER
to select Bluetooth Menu.
3.
Press
or
to scroll to Bluetooth Power.
4.
Press
ENTER
to select Bluetooth Power.
5.
Press
or
to scroll to Enable Bluetooth.
6.
Press
ENTER
to select Enable Bluetooth.
7.
Press
or
to scroll to Bluetooth Mode.
8.
Press
ENTER
to select Bluetooth Mode.
9.
Press
or
to scroll to BT Printer.
10.
Press
ENTER
to select BT Printer. The meter is now ready to connect with a
Bluetooth printer. When the meter is available for the Bluetooth connection
the Bluetooth printer icon next to the battery icon will flash.
11.
Turn on the Bluetooth printer. Within a few seconds it will connect to the
meter. If the Bluetooth printer connection to the meter is successful, the
Bluetooth printer icon will remain on and no longer flash.
Содержание Martel 5-0067
Страница 1: ...BLUETOOTH MOBILE PRINTER Code 5 0067...
